ViewZ RTDVR series Manual de usuario descargar pdf (Pagina 74)

To set up and use PTZ patrols:

1. Enter the PTZ Control interface, shown in Figure 3 by clicking PTZ in the mouse menu or the PTZ

button on the front panel.

2. Select the Patrol button to enter the Patrol Management menu, shown in Figure 5.

Figure 5. Patrol Management Menu

3. In the Patrol Management menu, you may:

• Configure Patrol:

1. Select a Patrol Number to set.

2. Select valid presets (See Customizing Presets) and click the Set button to enter the

Patrol configuration menu. A sequence should have at least 2 valid presets.

3. Set the Key Point No., Duration, and Speed (Figure 6). The Key Point No. determines

the order at which the PTZ will follow while cycling through the patrol. The Duration

refers to the time span to stay at the corresponding key point. The Speed defines the

rate at which the PTZ will move from one key point to the next.

Figure 6. Patrol Configuration Menu

4. Click OK to return to Patrol Management menu and repeat steps 2-3 to configure other

key points.

1 2 ... 69 70 71 72 73 74 75 76 77 78 79 ... 100 101

Sin comentarios

ViewZ RTDVR series Manual de usuario Pagina 74